IIR Direct method with MIP and Sin Low Pass.
The frequency response and Z plane poles for a low pass IIR filter with mirror image poles generated by the sine is shown in green in the applet below.
To design a filter with a gain of -1dB at 0.1ws and -50dB at
0.2ws. First set BL = 75 and WL =
150 to locate the frequencies. Now adjust N and fc/fs until the
requirements are met. This gives N = 12 and fc/fs = 0.108.
Changing nP shows the numerical values of the poles and changing Fn to 1
shows the quadratic factors necessary to realize the filter.
Return to page
COPYRIGHT © 1999,2008 Cuthbert A. Nyack.